Home › Engine / Hybrid System › 5L-E LUBRICATION › OIL PRESSURE SWITCH › from 2016.01
RM3250E _51 Engine / Hybrid System _049916 5L-E LUBRICATION _0244988 OIL PRESSURE SWITCH G

5L-E LUBRICATION  OIL PRESSURE SWITCH  INSPECTION  


PROCEDURE

Hide 83530 1.INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.

Disconnect the connector from the engine oil pressure switch assembly.


b.

Start the engine.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance
Tester Connection Condition Specified Condition
1 - Body ground Engine stopped Below 1 Ω
Engine idling 10 kΩ or higher

If the result is not as specified, replace the engine oil pressure switch assembly.


d.

Connect the connector to the engine oil pressure switch assembly.