Home › Engine / Hybrid System › 5L-E LUBRICATION › OIL PUMP › from 2016.01
RM3250E _51 Engine / Hybrid System _049916 5L-E LUBRICATION _0244989 OIL PUMP A

5L-E LUBRICATION  OIL PUMP  REASSEMBLY  


PROCEDURE

Hide 15121 1.INSTALL OIL PUMP DRIVE GEAR

a.

Place the timing belt case sub-assembly on wooden blocks.

NOTICE:

Do not damage the timing pointer.



b.
A057459C02
1.896,0.281 2.521,0.583 2.521,0.583 1.938,0.896 true 2.583,0.479 2.781,0.656 0.198,0.177 10 false *a
*a Mark


Insert the oil pump drive gear and oil pump driven gear into the timing belt case sub-assembly with the marks facing the oil pump cover side.


Hide 15115 2.INSTALL OIL PUMP COVER

a.

Apply adhesive to 2 or 3 threads of the screws.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent



b.

Install the oil pump cover to the timing belt case sub-assembly with the 8 screws.

Torque:
10.3 N*m (105 kgf*cm, 8 ft.*lbf)


Hide 15131 3.INSTALL OIL PUMP RELIEF VALVE

a.

Insert the oil pump relief valve and oil pump relief valve spring into the installation hole of the timing belt case sub-assembly.


b.

Using a 12 mm hexagon wrench, install a new gasket and the oil pump relief valve plug.

Torque:
36.8 N*m (375 kgf*cm, 27 ft.*lbf)