Home › Engine / Hybrid System › 5L-E ENGINE CONTROL › CRANKSHAFT POSITION SENSOR › from 2016.01
RM3250E _51 Engine / Hybrid System _049910 5L-E ENGINE CONTROL _0244995 CRANKSHAFT POSITION SENSOR A

5L-E ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 11401G 1.REMOVE CRANKSHAFT POSITION SENSOR

a.
A378206

Disconnect the connector from the crankshaft position sensor.


b.

Remove the bolt and crankshaft position sensor from the cylinder block sub-assembly.