Home › Engine / Hybrid System › 5L-E ENGINE CONTROL › ECD SYSTEM › from 2016.01
RM3250E _51 Engine / Hybrid System _049910 5L-E ENGINE CONTROL _0245156 ECD SYSTEM M

5L-E ENGINE CONTROL  ECD SYSTEM  REGISTRATION  


CAUTION / NOTICE / HINT

NOTICE:

The Vehicle Identification Number (VIN) must be input into a replacement ECM.


PROCEDURE

Hide 1. DESCRIPTION

HINT:

This registration section consists of 2 parts: Read VIN or Frame Number and Write VIN or Frame Number.


This registration section consists of two parts: Read VIN and Write VIN.

a.

Read VIN or Frame Number: This procedure allows the VIN or frame number stored in the ECM to be read in order to confirm that the VINs or frame numbers, provided on the vehicle body and stored in the vehicle ECM, are the same.


b.

Write VIN or Frame Number: This procedure allows the VIN or frame number to be written into the ECM. If the ECM is replaced, or the ECM VIN or frame number and vehicle VIN or frame number do not match, the VIN or frame number can be registered, or overwritten in the ECM by following this procedure.


Hide 2. READ VIN OR FRAME NUMBER

a.

Confirm the vehicle VIN or frame number.


b.

Connect the GTS to the DLC3.


c.

Turn the ignition switch to ON.


d.

Turn the GTS on.


e.

Enter the following menus: Powertrain / Engine and ECT / Utility / VIN / VIN Read.

Powertrain > Engine > Utility
Tester Display
VIN
50005 234 2384

f.

According to the display on the GTS, read the frame number or VIN stored in the ECM.


Hide 3. WRITE VIN OR FRAME NUMBER

a.

Confirm the vehicle VIN or frame number.


b.

Connect the GTS to the DLC3.


c.

Turn the ignition switch to ON.


d.

Turn the GTS on.


e.

Enter the following menus: Powertrain / Engine and ECT / Utility / VIN / VIN Write.

Powertrain > Engine > Utility
Tester Display
VIN
50005 234 2384

f.

According to the display on the GTS, write the vehicle frame number or VIN to the ECM.