Home › Engine / Hybrid System › 5L-E ENGINE MECHANICAL › CYLINDER HEAD › from 2016.01
RM3250E _51 Engine / Hybrid System _049911 5L-E ENGINE MECHANICAL _0245950 CYLINDER HEAD A

5L-E ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 13751 1.REMOVE VALVE LIFTER

a.

Remove the valve lifter and valve adjusting shim.

HINT:

Arrange the valve lifters and valve adjusting shims in the correct order.



Hide 13711 2.REMOVE INTAKE VALVE

a.
A057444E03
2.01,0.354 2.208,0.25 false 2.063,0.073 2.479,0.365 0.417,0.292 10 false SST

Using SST, compress the inner compression spring and remove the 2 valve spring retainer locks.

SST
09202-70020  (09202-00030)


b.

Remove the valve spring retainer, inner compression spring, valve and valve spring seat plate washer from the cylinder head sub-assembly.

HINT:

Arrange the valves, inner compression springs, valve spring seat plate washers and valve spring retainers in the correct order.



Hide 13715 3.REMOVE EXHAUST VALVE

a.
A059347E03
1.615,0.458 1.865,0.219 false 1.885,0.073 2.292,0.375 0.406,0.302 10 false SST

Using SST, compress the inner compression spring and remove the 2 valve spring retainer locks.

SST
09202-70020  (09202-00030)


b.

Remove the valve spring retainer, inner compression spring, valve and valve spring seat plate washer from the cylinder head sub-assembly.

HINT:

Arrange the valves, inner compression springs, valve spring seat plate washers and valve spring retainers in the correct order.



Hide 13711E 4.REMOVE VALVE STEM OIL SEAL

a.
A057250

Using needle-nose pliers, remove the valve stem oil seal from the valve guide bush.


Hide 11106 5.REMOVE COMBUSTION CHAMBER SUB-ASSEMBLY

a.
A057259E03
1.26,0.875 0.927,0.875 false 0.552,0.76 0.99,1.021 0.438,0.26 10 false SST

Using SST, remove the 4 combustion chamber sub-assemblies.

SST
09208-48010  

HINT:

Arrange the combustion chamber sub-assemblies in the correct order.



Hide 11183 6.REMOVE SEMICIRCULAR PLUG

a.

Remove the semicircular plug from the cylinder head sub-assembly.


Hide 7.REMOVE STUD BOLT

HINT:

If a stud bolt is deformed or its threads are damaged, replace it.


a.

Remove the stud bolts from the cylinder head sub-assembly.