16100
1.INSTALL ENGINE WATER PUMP ASSEMBLY
|
Bolt A |
|
Bolt B |
Install a new gasket and the engine water pump assembly with the 10 bolts.
Make sure that there is no oil on the threads of bolts A.
16620D
2.INSTALL V-RIBBED BELT TENSIONER ASSEMBLY
|
Bolt A |
|
Bolt B |
|
Bolt C |
Temporarily install the V-ribbed belt tensioner assembly with the 3 bolts.
Make sure the flanges of the bolts are contacting the tensioner surface.
Install the V-ribbed belt tensioner assembly by tightening the 3 bolts in the order shown in the illustration.
16603
3.INSTALL NO. 1 IDLER PULLEY SUB-ASSEMBLY
| *1 | Spacer |
| *2 | No. 1 Idler Pulley Sub-assembly |
Install the spacer and No. 1 idler pulley sub-assembly with the bolt.
15301
4.INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE
Install a new O-ring and the engine oil level dipstick guide with the bolt.
Install the engine oil level dipstick.
27020
5.INSTALL GENERATOR ASSEMBLY
for 80A Type: Click herePower Source / Network>1TR-FE BATTERY / CHARGING>GENERATOR(for 80A Type)>INSTALLATION
for 90A Type: Click herePower Source / Network>1TR-FE BATTERY / CHARGING>GENERATOR(for 90A Type)>INSTALLATION
16711
6.INSTALL FAN SHROUD
16470
7.INSTALL RADIATOR RESERVOIR
16572
8.INSTALL RADIATOR HOSE OUTLET
16571
9.INSTALL RADIATOR HOSE INLET
10.ADD ENGINE COOLANT
11.INSPECT FOR COOLANT LEAK
51410
12.INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY