16100
1.INSTALL ENGINE WATER PUMP ASSEMBLY
|
Bolt A |
|
Bolt B |
Install a new gasket and the engine water pump assembly with the 10 bolts.
Make sure that there is no oil on the threads of bolts A.
16620D
2.INSTALL V-RIBBED BELT TENSIONER ASSEMBLY
|
Bolt A |
|
Bolt B |
|
Bolt C |
Temporarily install the V-ribbed belt tensioner assembly with the 3 bolts.
Make sure the flanges of the bolts are contacting the tensioner surface.
Install the V-ribbed belt tensioner assembly by tightening the 3 bolts in the order shown in the illustration.
16603
3.INSTALL NO. 1 IDLER PULLEY SUB-ASSEMBLY
| *1 | Spacer |
| *2 | No. 1 Idler Pulley Sub-assembly |
Install the spacer and No. 1 idler pulley sub-assembly with the bolt.
15301
4.INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE
Install a new O-ring and the engine oil level dipstick guide with the bolt.
Install the engine oil level dipstick.
27020
5.INSTALL GENERATOR ASSEMBLY
for 80A Type: Click herePower Source / Network>2TR-FE BATTERY / CHARGING>GENERATOR(for 80A Type)>INSTALLATION
for 90A Type: Click herePower Source / Network>2TR-FE BATTERY / CHARGING>GENERATOR(for 90A Type)>INSTALLATION
16711
6.INSTALL FAN SHROUD
16470
7.INSTALL RADIATOR RESERVOIR
17621A
8.CONNECT AIR PUMP INLET (w/ Secondary Air Injection System)
Connect the air pump inlet to the fan shroud with the bolt.
16572
9.INSTALL RADIATOR HOSE OUTLET
16571
10.INSTALL RADIATOR HOSE INLET
11.ADD ENGINE COOLANT
12.INSPECT FOR COOLANT LEAK
51410
13.INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY