Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM RESERVOIR(for 5L-E) › from 2016.01
RM3250E _54 Brake _038045 BRAKE SYSTEM (OTHER) _0250464 VACUUM RESERVOIR(for 5L-E) A

BRAKE SYSTEM (OTHER)  VACUUM RESERVOIR(for 5L-E)  INSTALLATION  


PROCEDURE

Hide 44704 1.INSTALL VACUUM RESERVOIR SUB-ASSEMBLY

a.

Install the vacuum reservoir sub-assembly with the 3 bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


b.

Connect the suction hose sub-assembly to the vacuum reservoir sub-assembly with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 44777 2.CONNECT NO. 1 VACUUM HOSE CONNECTOR

a.

Connect the No. 1 vacuum hose connector and slide the clip to secure it.


Hide 44773F 3.CONNECT UNION TO CHECK VALVE HOSE

a.

Connect the union to check valve hose and slide the clip to secure it.