Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER(w/o ABS) › from 2016.01
RM3250E _54 Brake _038045 BRAKE SYSTEM (OTHER) _0190626 BRAKE BOOSTER(w/o ABS) A

BRAKE SYSTEM (OTHER)  BRAKE BOOSTER(w/o ABS)  INSTALLATION  


PROCEDURE

Hide 44785 1.INSTALL BRAKE BOOSTER GASKET

a.

Install a new brake booster gasket to the brake booster assembly.


Hide 44610 2.INSTALL BRAKE BOOSTER ASSEMBLY

a.

Install the brake booster assembly with the 4 nuts.

Torque:
18.4 N*m (188 kgf*cm, 14 ft.*lbf)


b.

for 2KD-FTV:

i.

Install the 2 new grommets to the brake booster assembly.


ii.

Install the vacuum warning switch assembly to the brake booster assembly.

Click hereBrake>BRAKE SYSTEM (OTHER)>VACUUM WARNING SWITCH(for Diesel)>INSTALLATION


iii.

Install the brake vacuum check valve assembly to the brake booster assembly.



c.

for 1TR-FE, 2TR-FE:

i.

Install the 2 new grommets to the brake booster assembly.


ii.

Install the 2 brake vacuum check valve assemblies to the brake booster assembly.



Hide 47201 3.INSTALL BRAKE MASTER CYLINDER SUB-ASSEMBLY

Hide 4.CONNECT VACUUM HOSE

a.

Connect the 2 vacuum hoses to each brake vacuum check valve assembly, and slide the 2 clips to secure them.


Hide 47264D 5.INSTALL BRAKE MASTER CYLINDER PUSH ROD CLEVIS

a.

Install the brake master cylinder push rod clevis to the brake booster assembly.


Hide 47264A 6.INSTALL PUSH ROD PIN

Hide 47101A 7.INSTALL BRAKE PEDAL RETURN SPRING

Hide 9.BLEED CLUTCH LINE

Hide 10.CHECK AND ADJUST BRAKE PEDAL HEIGHT