Home › Brake › BRAKE (REAR) › REAR BRAKE(for TSAM Made 2WD) › from 2016.01
RM3250E _54 Brake _038047 BRAKE (REAR) _0250236 REAR BRAKE(for TSAM Made 2WD) A

BRAKE (REAR)  REAR BRAKE(for TSAM Made 2WD)  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.DISCONNECT REAR BRAKE SHOE RETURN SPRING

a.
C353216N01
2.552,0.927 2.74,1.354 2.74,1.354 2.969,1.354 true 3.031,1.281 3.333,1.479 0.302,0.198 10 true SST

Using SST, disconnect the rear brake shoe return spring from the front brake shoe and rear brake shoe.

NOTICE:

Be careful not to damage the rear wheel cylinder boot.


SST
09703-30011  


Hide 2.DISCONNECT SHOE TENSION SPRING

a.
C323358

Disconnect the shoe tension spring from the front brake shoe and rear brake shoe.


Hide 04495 3.REMOVE FRONT BRAKE SHOE

a.
C353217N01
1.354,1.375 1.198,1.917 1.198,1.917 0.979,1.917 true 0.656,1.854 0.948,2.031 0.292,0.177 10 true SST

Using SST, remove the shoe hold down spring cup, shoe hold down spring, pin and front brake shoe.

SST
09718-00011  


Hide 4.REMOVE PARKING BRAKE SHOE STRUT SET LH

a.

Remove the parking brake shoe strut set from the rear brake shoe.

NOTICE:

Do not disassemble the strut set, and be careful not to damage or bend any of the components.



Hide 04495 5.REMOVE REAR BRAKE SHOE

a.
C353218N01
2.135,1.104 2.135,1.938 2.135,1.938 1.99,1.938 true 1.646,1.875 1.958,2.063 0.313,0.188 10 true SST

Using SST, remove the shoe hold down spring cup, shoe hold down spring and pin.

SST
09718-00011  


b.

Using needle-nose pliers, remove the adjust lever tension spring from the automatic adjust lever. Then remove the rear brake shoe.


c.
C353219

Using needle-nose pliers, disconnect the No. 3 parking brake cable assembly from the rear brake parking brake shoe lever sub-assembly.


Hide 47644A 6.REMOVE REAR BRAKE AUTOMATIC ADJUST LEVER LH

a.
C353220

Using a screwdriver, remove the E-ring and rear brake automatic adjust lever LH.


Hide 47602 7.REMOVE REAR BRAKE PARKING BRAKE SHOE LEVER SUB-ASSEMBLY

a.
C353221C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the C-washer and rear brake parking brake shoe lever sub-assembly.


Hide 47570 8.REMOVE REAR BRAKE WHEEL CYLINDER ASSEMBLY LH

a.
C323363

Using a union nut wrench, disconnect the brake line from the rear brake wheel cylinder assembly LH.


b.

Remove the 2 bolts and rear brake wheel cylinder assembly LH from the backing plate.


Hide 47548R 9.REMOVE REAR BRAKE DRUM BLEEDER PLUG CAP

Hide 47547R 10.REMOVE REAR BRAKE DRUM BLEEDER PLUG

a.

Remove the rear brake drum bleeder plug from the rear wheel brake cylinder assembly LH.


Hide 04906 11.REMOVE REAR WHEEL CYLINDER CUP KIT

a.

Remove the 2 rear wheel cylinder boots from the rear brake wheel cylinder.


b.

Remove the 2 rear wheel cylinder pistons.


c.

Remove the rear wheel cylinder cup from each wheel cylinder piston.


d.

Remove the rear brake wheel cylinder compression spring from the rear brake wheel cylinder.