1.DRAIN MANUAL TRANSMISSION OIL
Remove the manual transmission filler plug and gasket.
Remove the drain plug sub-assembly and gasket to drain the manual transmission oil.
Install a new gasket and the drain plug sub-assembly.
2.ADD MANUAL TRANSMISSION OIL
| *a | 0 to 5 mm (0 to 0.196 in.) |
Add manual transmission oil until the manual transmission oil level is within 0 to 5 mm (0.196 in.) from the bottom of the manual transmission filler plug opening.
| Manual transmission oil grade | Manual transmission oil viscosity | Standard capacity |
|---|---|---|
| Gear oil API GL-3 (GL-4) | ·
Above -10°C (14°F): SAE 75W-90, 80W or 80W-90 ·
Below -10°C (14°F): SAE 75W-90 |
2.6 liters (2.7 US qts, 2.3 Imp. qts) |
Install a new gasket and the manual transmission filler plug.