Home › Drivetrain › RC60 / RC61 MANUAL TRANSMISSION / TRANSAXLE › MANUAL TRANSMISSION OIL › from 2016.01
RM3250E _52 Drivetrain _038035 RC60 / RC61 MANUAL TRANSMISSION / TRANSAXLE _0185568 MANUAL TRANSMISSION OIL A

RC60 / RC61 MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSMISSION OIL  REPLACEMENT  


PROCEDURE

Hide 1.DRAIN MANUAL TRANSMISSION OIL

a.

Remove the manual transmission filler plug and gasket.


b.

Remove the drain plug sub-assembly and gasket and then drain the manual transmission oil.


c.

Install a new gasket and the drain plug sub-assembly.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


Hide 2.ADD MANUAL TRANSMISSION OIL

a.
C278961C07
2.667,0.854 2.979,1.052 0.313,0.198 10 false *a
*a 0 to 5.0 mm (0 to 0.196 in.)


Add manual transmission oil until the oil level is within 0 to 5 mm (0 to 0.196 in.) from the bottom of the manual transmission case plug opening.

Manual transmission oil:
Oil grade Oil viscosity Standard capacity
Gear oil API GL-3 (GL-4)
·

Above -10°C (14°F):

SAE 75W-90, 80W or 80W-90

·

Below -10°C (14°F):

SAE 75W-90


2.7 liters (2.9 US qts, 2.4 Imp. qts)