Home › Power Source / Network › NETWORKING › LIN COMMUNICATION SYSTEM › from 2016.01
RM3250E _57 Power Source / Network _038063 NETWORKING _0186537 LIN COMMUNICATION SYSTEM D

NETWORKING  LIN COMMUNICATION SYSTEM  SYSTEM DESCRIPTION  


LIN COMMUNICATION SYSTEM DESCRIPTION


The LIN communication system is used for communication between the components in the tables below. If communication cannot be performed through LIN communication because of a break in the communication lines or some other reason, the master control ECU of the relevant system stores DTCs. Refer to the table below about the communication bus lines and connected components.

HINT:
·

Each component has a fail-safe function which activates to maintain the minimum performance of the system and protect the system.

·

In the following table, "○" indicates that the function applies, and "-" indicates that it does not.



Certification Bus Lines (w/ Entry and Start System)
Component Master Control LIN Communication DTC Output Function

*: w/ ID Code Box (Immobiliser Code ECU)

Certification ECU (smart key ECU assembly) ○ ○
Steering lock actuator or upper bracket assembly - -
ID code box (immobiliser code ECU)* - -

Air Conditioning Bus Lines (for Automatic Air Conditioning System)
Component Master Control LIN Communication DTC Output Function
Air conditioning amplifier assembly ○ ○
Air conditioning control assembly - -