Home › Power Source / Network › NETWORKING › LIN COMMUNICATION SYSTEM › 2016.01–2016.03
RM3250E _57 Power Source / Network _038063 NETWORKING _0186537 LIN COMMUNICATION SYSTEM U

NETWORKING  LIN COMMUNICATION SYSTEM  TERMINALS OF ECU  


CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) [w/ Entry and Start System]


B391999N01
2.281,0.583 2.781,0.833 0.5,0.25 4.052,0.583 4.552,0.833 0.5,0.25 2.396,0.635 2.854,0.833 0.458,0.198 10 false G69 4.167,0.635 4.625,0.833 0.458,0.198 10 false G70

a.

Disconnect the G69 certification ECU connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G69-1 (+B) - Body ground P - Body ground Battery power supply Always 11 to 14 V
G69-10 (E) - Body ground BR - Body ground Ground Always Below 1 Ω



CHECK STEERING LOCK ACTUATOR OR UPPER BRACKET ASSEMBLY (w/ Entry and Start System)


B118684N86
3.458,0.188 3.833,0.406 0.375,0.219 3.521,0.229 3.844,0.396 0.323,0.167 10 false G71

a.

Disconnect the G71 steering lock actuator or upper bracket assembly connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G71-7 (B) - Body ground W - Body ground Battery power supply Always 11 to 14 V
G71-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω



CHECK ID CODE BOX (IMMOBILISER CODE BOX) (w/ Entry and Start System [w/ ID Code Box (Immobiliser Code ECU)])


B302477N07
1.542,0.563 1.938,0.771 0.396,0.208 1.615,0.583 2.073,0.781 0.458,0.198 10 false G82

a.

Disconnect the G82 ID code box connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G82-1 (+B) - Body ground L - Body ground Battery power supply Always 11 to 14 V
G82-5 (GND) - Body ground BR - Body ground Ground Always Below 1 Ω



CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY (for Automatic Air Conditioning System)


E315720N04
2.667,0.167 3.167,0.417 0.5,0.25 2.792,0.208 3.25,0.406 0.458,0.198 10 false G33

a.

Disconnect the G33 air conditioning amplifier assembly connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G33-1 (IG+) - Body ground G - Body ground IG power supply Ignition switch ON 11 to 14 V
G33-1 (IG+) - Body ground G - Body ground IG power supply Ignition switch off Below 1 V
G33-21 (B) - Body ground W - Body ground Battery power supply Always 11 to 14 V
G33-14 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω



CHECK AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)


E315721N03
1.427,0.24 1.927,0.49 0.5,0.25 1.542,0.281 2,0.479 0.458,0.198 10 false G32

a.

Disconnect the G32 air conditioning control assembly connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G32-2 (IG+) - Body ground L - Body ground IG power supply Ignition switch ON 11 to 14 V
G32-2 (IG+) - Body ground L - Body ground IG power supply Ignition switch off Below 1 V
G32-4 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω