FUEL INJECTION PUMP
| Item
|
Tester Connection
|
Condition
|
Specified Condition
|
| Engine speed sensor
|
1 - 2
|
20°C (68°F)
|
215 to 245 Ω
|
| Spill control valve
|
1 - 2
|
20°C (68°F)
|
1 to 1.4 Ω
|
| Fuel temperature sensor
|
1 - 2
|
20°C (68°F)
|
2.21 to 2.69 kΩ
|
| Timing control valve assembly
|
1 - 2
|
20°C (68°F)
|
10 to 12.6 Ω
|
FUEL INJECTION NOZZLE
| Standard pressure
|
16180 to 16770 kPa (165.0 to 171.0 kgf/cm2, 2346 to 2432 psi)
|
FUEL FILTER
| Item
|
Tester Connection
|
Condition
|
Specified Condition
|
| Level warning switch
|
3 - 4
|
Float at upper end position
|
Below 1 Ω
|
| Float at lower end position
|
10 kΩ or higher
|
| Clogging switch
|
1 - 2
|
20°C (68°F)
|
Below 1 Ω
|
FUEL SENDER GAUGE ASSEMBLY
| Tester Connection
|
Condition
|
Specified Condition
|
| 2 - 3
|
Float position is F (upper)
|
4.25 to 4.61 V*
|
| Float position is E (lower)
|
0.34 to 0.70 V*
|
*: The output voltage changes depending on the voltage applied to the terminals.