Home › Engine / Hybrid System › 2GD-FTV EMISSION CONTROL › EXHAUST GAS TEMPERATURE SENSOR(w/ Urea SCR System) › from 2016.03
RM3250E _51 Engine / Hybrid System _038008 2GD-FTV EMISSION CONTROL _0262566 EXHAUST GAS TEMPERATURE SENSOR(w/ Urea SCR System) A

2GD-FTV EMISSION CONTROL  EXHAUST GAS TEMPERATURE SENSOR(w/ Urea SCR System)  REMOVAL  


PROCEDURE

Hide 89425C 1.REMOVE NO. 4 EXHAUST GAS TEMPERATURE SENSOR

a.
A379836

Disconnect the connector from the No. 4 exhaust gas temperature sensor.


b.
A379837

Detach the 2 clamps and disconnect the No. 4 exhaust gas temperature sensor from the sensor bracket.


c.
A379838

Using a 14 mm union nut wrench, remove the No. 4 exhaust gas temperature sensor from the front exhaust pipe assembly.