Home › Engine / Hybrid System › 2GD-FTV EMISSION CONTROL › EXHAUST GAS TEMPERATURE SENSOR(w/ Urea SCR System) › from 2016.03
RM3250E _51 Engine / Hybrid System _038008 2GD-FTV EMISSION CONTROL _0262566 EXHAUST GAS TEMPERATURE SENSOR(w/ Urea SCR System) G

2GD-FTV EMISSION CONTROL  EXHAUST GAS TEMPERATURE SENSOR(w/ Urea SCR System)  INSPECTION  


PROCEDURE

Hide 89425C 1.INSPECT NO. 4 EXHAUST GAS TEMPERATURE SENSOR

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 50°C (122°F) 7894 to 12187 Ω
1 - 2 650°C (1202°F) 73 to 79 Ω


HINT:

The temperature indicated in "Condition" is the temperature of the No. 4 exhaust gas temperature sensor.


If the result is not as specified, replace the No. 4 exhaust gas temperature sensor.