Home › Engine / Hybrid System › 2GD-FTV EMISSION CONTROL › UREA INJECTOR › from 2016.03
RM3250E _51 Engine / Hybrid System _038008 2GD-FTV EMISSION CONTROL _0262567 UREA INJECTOR G

2GD-FTV EMISSION CONTROL  UREA INJECTOR  INSPECTION  


PROCEDURE

Hide 23203A 1.INSPECT UREA INJECTOR SET

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 11.6 to 12.4 Ω


If the result is not as specified, replace the urea injector set.