Home › Engine / Hybrid System › 2GD-FTV EMISSION CONTROL › UREA TANK › from 2016.03
RM3250E _51 Engine / Hybrid System _038008 2GD-FTV EMISSION CONTROL _0262571 UREA TANK N

2GD-FTV EMISSION CONTROL  UREA TANK  REFILL  


CAUTION / NOTICE / HINT

NOTICE:
·

Only refill with urea solution (AdBlue) (compliant with ISO 22241-1).

·

Take care when refilling urea solution (AdBlue) without using SST, as urea solution (AdBlue) may overflow from the refill port.

·

If urea solution (AdBlue) comes into contact with any painted surfaces on the vehicle, immediately wash the affected areas with water.

·

If urea solution (AdBlue) is spilled inside the engine compartment, immediately wipe it with a wet cloth.



PROCEDURE

Hide 1.REFILL UREA SOLUTION (AdBlue)

a.

Remove the urea tank cap assembly.


b.
A338387N02
1.708,0.375 1.865,0.375 1.865,0.375 2.281,0.635 true 1.385,0.292 1.729,0.469 0.344,0.177 10 false SST

Set SST to the urea tank filler pipe assembly and refill the urea solution (AdBlue).

SST
09998-60010  

HINT:

For instructions on how to use SST, refer to its instruction manual.



c.

Remove SST from the urea tank filler pipe assembly.

NOTICE:
·

If urea solution (AdBlue) comes into contact with any painted surfaces on the vehicle, immediately wash the affected areas with water.

·

If urea solution (AdBlue) is spilled inside the engine compartment, immediately wipe it with a wet cloth.




d.

Install the urea tank cap assembly.