Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH SAFETY SYSTEM WARNING BUZZER(for RHD) › from 2016.03
RM3250E _58 Vehicle Interior _053993 PRE-CRASH SAFETY _0262632 PRE-CRASH SAFETY SYSTEM WARNING BUZZER(for RHD) A

PRE-CRASH SAFETY  PRE-CRASH SAFETY SYSTEM WARNING BUZZER(for RHD)  INSTALLATION  


PROCEDURE

Hide 86652E 1.INSTALL SKID CONTROL BUZZER

NOTICE:

If the skid control buzzer assembly has been struck or dropped, replace it with a new one.


a.

Connect the connector.


b.

Attach the clamp to install the skid control buzzer.

HINT:

Make sure to install the skid control buzzer assembly in the correct direction.



Hide 73900 2.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION