Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING(for Double Cab) › from 2016.03
RM3250E _58 Vehicle Interior _037970 INTERIOR PANELS / TRIM _0189529 ROOF HEADLINING(for Double Cab) A

INTERIOR PANELS / TRIM  ROOF HEADLINING(for Double Cab)  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 82171 1.INSTALL NO. 1 ROOF WIRE

a.

w/o Pre-crash Safety System:

i.

Fix the No. 1 roof wire in place with tape as shown in the illustration.

HINT:

Align the tape with the markings when attaching it.


B404648C02
3.844,1.625 4.438,1.708 false 4.375,1.615 4.594,1.771 0.219,0.156 10 true *a
*a Marking
V100155

Tape




b.

w/ Pre-crash Safety System:

i.

Fix the No. 1 roof wire in place with tape as shown in the illustration.

HINT:

Align the tape with the markings when attaching it.


B443929C02
3.948,1.646 4.552,1.74 true 1.792,0.417 2.104,0.573 0.313,0.156 10 false *A 1.792,0.938 2.104,1.094 0.313,0.156 10 false *B 4.594,1.667 4.792,1.833 0.198,0.167 10 true *a
*A for LHD *B for RHD
*a Marking
V100155

Tape




Hide 63343 2.INSTALL NO. 3 ROOF SILENCER PAD

a.
B404647C01
2.729,1.708 3.01,1.656 true 3.01,1.552 3.24,1.729 0.229,0.177 10 true *a
*a Silencer Marking


Align the 2 No. 3 roof silencer pads with the silencer markings on the roof headlining and install the 2 No. 3 roof silencer pads using double-sided tape or adhesive as shown in the illustration.


Hide 63342 3.INSTALL NO. 2 ROOF SILENCER PAD

a.
B404646C01
1.406,1.708 1.885,1.625 true 1.885,1.542 2.125,1.708 0.24,0.167 10 true *a
*a Silencer Marking


Align the No. 2 roof silencer pad with the silencer markings on the roof headlining and install the No. 2 roof silencer pad using double-sided tape or adhesive as shown in the illustration.


Hide 63341 4.INSTALL NO. 1 ROOF SILENCER PAD

a.
B404645C01
0.854,0.844 1.281,0.719 true 1.292,0.615 1.521,0.771 0.229,0.156 10 true *a
*a Silencer Marking


Align the 2 No. 1 roof silencer pads with the silencer markings on the roof headlining and install the 2 No. 1 roof silencer pads using double-sided tape or adhesive as shown in the illustration.