Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING(for Smart Cab) › from 2016.03
RM3250E _58 Vehicle Interior _037970 INTERIOR PANELS / TRIM _0189531 ROOF HEADLINING(for Smart Cab) A

INTERIOR PANELS / TRIM  ROOF HEADLINING(for Smart Cab)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

A bolt without a torque specification is shown in the standard bolt chart.

Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS



PROCEDURE

Hide 58774A 1.INSTALL LUGGAGE COMPARTMENT SIDE COVER LH

a.
B404543C01
0,0 0,0 false
V113147

Install in this Direction


Attach the claw to install the luggage compartment side cover LH as shown in the illustration.


b.
B404541C01
2.854,1.146 3.083,1.302 0.229,0.156 10 true *1
*1 Front Door Opening Trim Weatherstrip LH


Connect the front door opening trim weatherstrip LH in the range shown in the illustration.


Hide 58773A 2.INSTALL LUGGAGE COMPARTMENT SIDE COVER RH

a.
B404546C01
0,0 0,0 false
V113147

Install in this Direction


Attach the claw to install the luggage compartment side cover RH as shown in the illustration.


b.
B404544C01
0.771,1.052 1.01,1.208 0.24,0.156 10 true *1
*1 Front Door Opening Trim Weatherstrip RH


Connect the front door opening trim weatherstrip RH in the range shown in the illustration.


Hide 67914B 3.INSTALL FRONT DOOR SCUFF PLATE LH

a.
B404505C01
0,0 0,0 false
V113147

Install in this Direction


Attach the clip and claw to install the front door scuff plate LH as shown in the illustration.


Hide 67913B 4.INSTALL FRONT DOOR SCUFF PLATE RH

a.
B404508C01
0,0 0,0 false
V113147

Install in this Direction


Attach the clip and claw to install the front door scuff plate RH as shown in the illustration.


Hide 66425A 5.INSTALL REAR NO. 2 SIDE RAIL SPACER LH (w/o Curtain Shield Airbag)

a.
B404536

Attach the claw to install the rear No. 2 side rail spacer LH.


Hide 66415A 6.INSTALL REAR NO. 2 SIDE RAIL SPACER RH (w/o Curtain Shield Airbag)

a.
B404537

Attach the claw to install the rear No. 2 side rail spacer RH.


Hide 66424 7.INSTALL REAR SIDE RAIL SPACER LH (w/o Curtain Shield Airbag)

a.
B404534

Attach the claw to install the rear side rail spacer LH.


Hide 66414A 8.INSTALL REAR SIDE RAIL SPACER RH (w/o Curtain Shield Airbag)

a.
B404535

Attach the claw to install the rear side rail spacer RH.


Hide 66423 9.INSTALL FRONT SIDE RAIL SPACER LH (w/o Curtain Shield Airbag)

a.
B404491

Attach the claw to install the front side rail spacer LH.


Hide 66413B 10.INSTALL FRONT SIDE RAIL SPACER RH (w/o Curtain Shield Airbag)

a.
B404492

Attach the claw to install the front side rail spacer RH.


Hide 63310 11.INSTALL ROOF HEADLINING ASSEMBLY

a.
B404533C01
0,0 0,0 false
V113147

Movement Direction


Insert the roof headlining assembly into the cabin from the front door.

NOTICE:
·

Check that the corners of the roof headlining assembly are not folded, twisted or otherwise deformed and that none of the mounted parts have fallen off.

·

Make sure that the roof headlining assembly does not get caught on anything as it may become bent or damaged.

·

Do not damage the roof headlining assembly or vehicle interior.




b.
B409952

Install the visor holder as shown in the illustration.


c.
B409953C01
0,0 0,0 false
V113147

Install in this Direction


Attach the claw to install the visor holder as shown in the illustration.

HINT:

Use the same procedure for both visor holders.



d.
B404531

Install the roof headlining assembly with the 3 clips.


e.
B404528C01
1.5,1.719 1.813,1.875 0.313,0.156 10 false *1
*1 Front Door Opening Trim Weatherstrip LH


Connect the front door opening trim weatherstrip LH in the range shown in the illustration.


f.
B404529C01
1.531,1.792 1.844,1.948 0.313,0.156 10 false *1
*1 Front Door Opening Trim Weatherstrip RH


Connect the front door opening trim weatherstrip RH in the range shown in the illustration.


g.

w/ Pre-crash Safety System:

i.
B443926

Connect the connector.



h.

w/o Pre-crash Safety System:

i.
B404484

Connect the connector and attach the clamp to the front pillar LH.



i.

w/ Pre-crash Safety System:

i.
B443959

Connect the connector and attach the clamp to the front pillar LH.



Hide 63339A 12.INSTALL ROOF HEADLINING SERVICE HOLE COVER (w/o Assist Grip)

a.
B410866

Install the 2 roof headlining service hole covers.


Hide 62432C 13.INSTALL FRONT ROOF SIDE RAIL GARNISH LH

a.
B404525C01
0,0 0,0 false
V113147

Install in this Direction


Attach the clip to install the front roof side rail garnish LH as shown in the illustration.


Hide 62431C 14.INSTALL FRONT ROOF SIDE RAIL GARNISH RH

a.
B404527C01
0,0 0,0 false
V113147

Install in this Direction


Attach the clip to install the front roof side rail garnish RH as shown in the illustration.


Hide 74610A 15.INSTALL ASSIST GRIP SUB-ASSEMBLY

HINT:

w/ Assist Grip:

Use the same procedure for both assist grip sub-assemblies.


a.
B404483

Install the assist grip sub-assembly with the 2 bolts.


b.
B404481

Attach the claw to close the assist grip cover.


Hide 74320 16.INSTALL VISOR ASSEMBLY LH

a.
B404637

Install the visor assembly LH with the 2 screws.


b.

Connect the visor assembly LH to the visor holder.


Hide 74310 17.INSTALL VISOR ASSEMBLY RH

a.
B404638

Install the visor assembly RH with the 2 screws.


b.

Connect the visor assembly RH to the visor holder.


Hide 74325 18.INSTALL VISOR BRACKET COVER LH

a.
B400165C01
0,0 0,0 false
V113147

Install in this Direction


Attach the claw to install the visor bracket cover LH as shown in the illustration.


Hide 74325 19.INSTALL VISOR BRACKET COVER RH

a.
B400116C01
0,0 0,0 false
V113147

Install in this Direction


Attach the claw to install the visor bracket cover RH as shown in the illustration.


Hide 81240 20.INSTALL NO. 1 ROOM LIGHT ASSEMBLY

Hide 81260A 21.INSTALL MAP LIGHT ASSEMBLY

Hide 86466D 22.INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ Pre-crash Safety System)

Hide 62512 23.INSTALL QUARTER INSIDE TRIM BOARD LH

a.
B404520C01
0,0 0,0 false
V113147

Install in this Direction


Attach the clip to install the quarter inside trim board LH as shown in the illustration.


b.
B404518C01
2.667,1.063 2.979,1.219 0.313,0.156 10 false *1
*1 Front Door Opening Trim Weatherstrip LH


Connect the front door opening trim weatherstrip LH in the range shown in the illustration.


c.
B421121

for RHD:

i.

Connect the rear seat outer belt assembly LH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)



Hide 62511 24.INSTALL QUARTER INSIDE TRIM BOARD RH

a.
B404523C01
0,0 0,0 false
V113147

Install in this Direction


Attach the clip to install the quarter inside trim board RH as shown in the illustration.


b.
B404521C01
0.479,1.073 0.792,1.229 0.313,0.156 10 false *1
*1 Front Door Opening Trim Weatherstrip RH


Connect the front door opening trim weatherstrip RH in the range shown in the illustration.


c.
B421126

for RHD:

i.

Connect the rear seat outer belt assembly RH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)



Hide 73178C 25.INSTALL SEAT BELT ANCHOR COVER CAP (for RHD)

HINT:

Use the same procedure for both seat belt anchor cover caps.


a.
B421120C01
0,0 0,0 false
V113147

Install in this Direction


Attach the claw to install the seat belt anchor cover cap as shown in the illustration.


Hide 62514A 26.INSTALL LOWER QUARTER TRIM PANEL LH

a.
B404514C01
0,0 0,0 false
V113147

Install in this Direction


Attach the clip and claw to install the lower quarter trim panel LH as shown in the illustration.


b.
B404512C01
2.417,1.031 2.729,1.188 0.313,0.156 10 false *1
*1 Front Door Opening Trim Weatherstrip LH


Connect the front door opening trim weatherstrip LH in the range shown in the illustration.


c.
B421117

for RHD:

i.

Connect the rear seat outer belt assembly LH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)



Hide 62513A 27.INSTALL LOWER QUARTER TRIM PANEL RH

a.
B404517C01
0,0 0,0 false
V113147

Install in this Direction


Attach the clip and claw to install the lower quarter trim panel RH as shown in the illustration.


b.
B404515C01
0.875,0.99 1.188,1.146 0.313,0.156 10 false *1
*1 Front Door Opening Trim Weatherstrip RH


Connect the front door opening trim weatherstrip RH in the range shown in the illustration.


c.
B421122

for RHD:

i.

Connect the rear seat outer belt assembly RH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)



Hide 64271C 28.INSTALL BACK PANEL TRIM

a.
B404511C01
0,0 0,0 false
V113147

Install in this Direction


Attach the clip and claw to install the back panel trim as shown in the illustration.


Hide 29.INSTALL REAR SEAT CUSHION ASSEMBLY (for RHD)

Hide 62212 30.INSTALL FRONT PILLAR GARNISH LH

Hide 62211 31.INSTALL FRONT PILLAR GARNISH RH

Hide 74610A 32.INSTALL ASSIST GRIP SUB-ASSEMBLY (w/ Assist Grip)

Hide 35.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Airbag System)

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION