Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH SAFETY SYSTEM › from 2016.03
RM3250E _58 Vehicle Interior _053993 PRE-CRASH SAFETY _0264409 PRE-CRASH SAFETY SYSTEM D

PRE-CRASH SAFETY  PRE-CRASH SAFETY SYSTEM  OPERATION CHECK  


CHECK PRE-CRASH SAFETY SYSTEM SETTING


a.

Turn the ignition switch to ON.


b.
B434171C01
0.469,0.167 0.781,0.323 0.313,0.156 10 false *a
*a PCS Warning Light


Press and hold the pre-crash safety system cancel switch assembly for 3 seconds or more and check that the PCS warning light in the combination meter assembly illuminates and "Pre-Crash Safety Off"*1 or "PRE-CRASH SAFETY OFF"*2 is displayed in the multi-information display.

*1: for TFT Display Type

*2: for Dot Display Type


HINT:

When the ignition switch is turned to ON, the PCS will turn on. This can be changed through a customize setting using the GTS.



c.

Press the pre-crash safety system cancel switch assembly and check that the pre-crash safety system turns on and the PCS warning light turns off.



CHECK PRE-CRASH SAFETY SYSTEM SENSITIVITY SETTING


a.

Turn the ignition switch to ON.


b.

Operate the pre-crash safety system cancel switch assembly to select Change PCS Sensitivity and check that the pre-crash safety system sensitivity setting displayed on the multi-information display changes between "Far", "Mid" and "Near" accordingly.

HINT:
·

Check that the sensitivity setting displayed on the multi-information display changes between "Far", "Mid", and "Near" accordingly.

·

The default setting is "Mid".