FAIL-SAFE FUNCTION
When a malfunction occurs in the pre-crash safety system, a message will be displayed on the multi-information display and the pre-crash safety system will be disabled depending on the malfunction.
| Warning Message | Cause | DTC No. | Conditions to Return to Normal |
|---|---|---|---|
·
"Pre-Crash Safety Malfunction Visit Your Dealer"*1 ·
"PRE-CRASH SAFETY MALFUNCTION VISIT YOUR DEALER"*2 |
Pre-crash safety system malfunction | C1A10 | After system returns to normal, ignition switch is turned off and then ON |
| C1A11 | After system returns to normal, ignition switch is turned off and then ON | ||
| C1A14 | System returns to normal | ||
| C1A46 | After system returns to normal, ignition switch is turned off and then ON | ||
| C1A47 | After system returns to normal, ignition switch is turned off and then ON | ||
| C1A4A | System returns to normal | ||
| C1A4B | System returns to normal | ||
| C1A50 | System returns to normal | ||
| C1A63 | System returns to normal | ||
| C1A69 | After system returns to normal, ignition switch is turned off and then ON | ||
| C1AA0 | After system returns to normal, ignition switch is turned off and then ON | ||
| C1AA8 | After system returns to normal, ignition switch is turned off and then ON | ||
| C1AA9 | After system returns to normal, ignition switch is turned off and then ON | ||
| U0100 | System returns to normal | ||
| U0125 | System returns to normal | ||
| U0126 | System returns to normal | ||
| U0129 | System returns to normal | ||
| U0235 | System returns to normal | ||
| U023A | System returns to normal | ||
| U1002 | System returns to normal | ||
·
"Pre-Crash Safety Unavailable"*1 ·
"PRE-CRASH SAFETY UNAVAILABLE"*2 |
·
Millimeter wave radar sensor assembly misaligned ·
Millimeter wave radar sensor assembly temperature malfunction ·
Millimeter wave radar sensor assembly low voltage malfunction |
·
Millimeter wave radar sensor beam axis adjustment is completed and beam axis learning is completed ·
Millimeter wave radar sensor temperature returns to normal ·
Millimeter wave radar sensor voltage returns to normal |
|
·
"Pre-Crash Safety Unavailable Clean Sensor"*1 ·
"PRE-CRASH SAFETY UNAVAILABLE CLEAN SENSOR"*2 |
Foreign matter attached to millimeter wave radar sensor assembly | Millimeter wave radar sensor assembly is cleaned | |
·
"Forward Camera System Unavailable"*1 ·
"FORWARD CAMERA SYSTEM UNAVAILABLE"*2 |
Forward recognition camera temporarily malfunctioning
·
Abnormal forward recognition camera voltage ·
Forward recognition camera temperature outside of operational range ·
Other forward recognition camera malfunction |
·
Forward recognition camera temperature returns to normal ·
Forward recognition camera voltage returns to normal ·
Forward recognition camera returns to normal |
|
·
"Forward Camera System Unavailable Clean Windshield"*1 ·
"FORWARD CAMERA SYSTEM UNAVAILABLE CLEAN WINDSHIELD"*2 |
Foreign matter attached to forward recognition camera or area of windshield in front of forward recognition camera | Forward recognition camera or area of windshield glass in front of forward recognition camera is cleaned | |
*1: for TFT Display Type
*2: for Dot Display Type