Home › Engine / Hybrid System › 2GD-FTV ENGINE CONTROL › NITROGEN OXIDES SENSOR › from 2016.03
RM3250E _51 Engine / Hybrid System _038005 2GD-FTV ENGINE CONTROL _0264434 NITROGEN OXIDES SENSOR A

2GD-FTV ENGINE CONTROL  NITROGEN OXIDES SENSOR  REMOVAL  


PROCEDURE

Hide 89460B 1.REMOVE NITROGEN OXIDES SENSOR ASSEMBLY

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


a.

Disconnect the connector.


b.
A349872

Remove the bolt and disconnect the 6 clamps.


c.
A349873N01
0.813,1.417 0.938,1.417 0.938,1.417 1.146,1.135 true 0.49,1.344 0.823,1.51 0.333,0.167 10 true SST

Using SST, remove the nitrogen oxides sensor assembly.

SST
09922-10010