Home › Engine / Hybrid System › STOP AND START › VACUUM SENSOR ASSEMBLY › from 2016.03
RM3250E _51 Engine / Hybrid System _053992 STOP AND START _0264441 VACUUM SENSOR ASSEMBLY A

STOP AND START  VACUUM SENSOR ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 44696 1.INSTALL VACUUM SENSOR GROMMET

a.

Install a new vacuum sensor grommet to the brake booster assembly.


Hide 89420H 2.INSTALL VACUUM SENSOR ASSEMBLY

a.
A346059C01
0.052,0.083 0.365,0.24 0.313,0.156 10 false *A 0.083,2.625 0.396,2.781 0.313,0.156 10 false *B 2.396,0.344 2.708,0.5 0.313,0.156 10 false *a 0.938,2.813 1.25,2.969 0.313,0.156 10 false *a
*A for LHD
*B for RHD
*a Approximately 90°


Install the vacuum sensor assembly to the brake booster assembly so that the vacuum sensor assembly is angled as shown in the illustration.


b.

Connect the vacuum sensor connector.