51407A
1.REMOVE NO.3 ENGINE UNDER COVER (w/ Cover)
51561D
2.REMOVE PROPELLER SHAFT GUARD
Remove the 2 bolts and propeller shaft guard.
Remove the propeller shaft guard bracket LH.
Perform this procedure only when replacement of the propeller shaft guard bracket LH is necessary.
w/ Urea SCR System:
Remove the 3 bolts and propeller shaft guard bracket LH.
w/o Urea SCR System:
Remove the 2 bolts and propeller shaft guard bracket LH.
Remove the 2 bolts and propeller shaft guard bracket RH.
Perform this procedure only when replacement of the propeller shaft guard bracket RH is necessary.
37140
3.REMOVE FRONT PROPELLER SHAFT ASSEMBLY
| *a | Matchmark |
Place matchmarks on the propeller shaft flange and transfer flange.
Remove the 4 nuts and 4 washers.
| *a | Matchmark |
Place matchmarks on the propeller shaft flange and differential flange.
Remove the 4 bolts, 4 nuts and 4 washers.
Remove the front propeller shaft assembly.