Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › FRONT PROPELLER SHAFT ASSEMBLY(for TMT Made) › from 2016.03
RM3250E _52 Drivetrain _038038 DRIVE SHAFT / PROPELLER SHAFT _0187314 FRONT PROPELLER SHAFT ASSEMBLY(for TMT Made) A

DRIVE SHAFT / PROPELLER SHAFT  FRONT PROPELLER SHAFT ASSEMBLY(for TMT Made)  REMOVAL  


PROCEDURE

Hide 51407A 1.INSTALL NO. 3 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Cover)

Hide 51561D 2.REMOVE PROPELLER SHAFT GUARD

a.
C317860

Remove the 2 bolts and propeller shaft guard.


b.

Remove the propeller shaft guard bracket LH.

HINT:

Perform this procedure only when replacement of the propeller shaft guard bracket LH is necessary.


i.
C353992

w/ Urea SCR System:

Remove the 3 bolts and propeller shaft guard bracket LH.


ii.
C330831

w/o Urea SCR System:

Remove the 2 bolts and propeller shaft guard bracket LH.



c.

Remove the 2 bolts and propeller shaft guard bracket RH.

HINT:

Perform this procedure only when replacement of the propeller shaft guard bracket RH is necessary.



Hide 37140 3.REMOVE FRONT PROPELLER SHAFT ASSEMBLY

a.
C317859C01
1.885,1 2.583,1.688 2.583,1.688 2.031,0.99 true 2.625,1.635 2.938,1.833 0.313,0.198 10 true *a
*a Matchmark


Place matchmarks on the propeller shaft flange and transfer flange.


b.

Remove the 4 nuts and 4 washers.


c.
C317858C01
1.615,1.521 2.427,1.927 2.427,1.927 1.615,1.354 true 2.51,1.833 2.823,2.031 0.313,0.198 10 true *a
*a Matchmark


Place matchmarks on the propeller shaft flange and differential flange.


d.

Remove the 4 bolts, 4 nuts and 4 washers.


e.

Remove the front propeller shaft assembly.