89668A
1.INSTALL NO. 2 ECM BRACKET
Install the No. 2 ECM bracket with the 2 screws.
89667A
2.INSTALL NO. 1 ECM BRACKET
Install the No. 1 ECM bracket with the 2 screws.
89533
3.INSTALL 4 WHEEL DRIVE CONTROL ECU (for 4WD)
89661
4.INSTALL ECM
for 4WD:
Install the ECM with the 4 wheel drive control ECU, with the bolt and 2 nuts.
Connect the 2 4 wheel drive control ECU connectors and 6 ECM connectors.
for 2WD and Pre-Runner:
Install the ECM with the bolt and 2 nuts.
Connect the 6 ECM connectors.
for LHD:
Attach the 2 clamps.
for RHD:
Attach the 3 clamps.
8926A
5.INSTALL ENGINE STOP AND START SOLENOID FILTER (w/ Stop and Start System for Automatic Transmission)
55550
6.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
55607
7.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
8.PERFORM REGISTRATION
Click hereEngine / Hybrid System>2GD-FTV ENGINE CONTROL>ECD SYSTEM>REGISTRATION
w/ DPF:
Click hereEngine / Hybrid System>2GD-FTV ENGINE CONTROL>ECD SYSTEM(w/ DPF)>REGISTRATION
w/ Urea SCR System:
Click hereEngine / Hybrid System>2GD-FTV ENGINE CONTROL>ECD SYSTEM(w/ Urea SCR System)>REGISTRATION