Home › Vehicle Interior › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY(for Double Cab) › from 2016.03
RM3250E _58 Vehicle Interior _038072 SEAT BELT _0185619 REAR SEAT OUTER BELT ASSEMBLY(for Double Cab) G

SEAT BELT  REAR SEAT OUTER BELT ASSEMBLY(for Double Cab)  INSPECTION  


PROCEDURE

Hide 73370C 1.INSPECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY

a.
B440577C01
0.094,0.104 0.406,0.26 0.313,0.156 10 false *A 2.51,0.021 2.823,0.177 0.313,0.156 10 false *a 0.802,0.5 1.115,0.656 0.313,0.156 10 false *b 1.594,0.427 1.906,0.583 0.313,0.156 10 false *c
*A w/ Pretensioner
*a Unlocked
*b Locked
*c 45°


B404872C02
2.521,0.052 2.833,0.208 0.313,0.156 10 false *a 0.75,0.552 1.063,0.708 0.313,0.156 10 false *b 1.635,0.458 1.948,0.615 0.313,0.156 10 false *c 0.094,0.073 0.406,0.271 0.313,0.198 10 false *A
*A w/o Pretensioner
*a Unlocked
*b Locked
*c 45°


Before installing the rear No. 1 seat outer belt assembly, check the ELR.

NOTICE:

Do not disassemble the retractor.


i.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

If the operation is not as specified, replace the rear No. 1 seat outer belt assembly.