Home › Vehicle Interior › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY(for Smart Cab) › from 2016.03
RM3250E _58 Vehicle Interior _038072 SEAT BELT _0191540 REAR SEAT OUTER BELT ASSEMBLY(for Smart Cab) G

SEAT BELT  REAR SEAT OUTER BELT ASSEMBLY(for Smart Cab)  INSPECTION  


PROCEDURE

Hide 73360C 1.INSPECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY

a.
B404824C01
1.896,0.115 2.208,0.271 0.313,0.156 10 false *a 0.448,0.802 0.76,0.958 0.313,0.156 10 false *b 1.313,0.542 1.625,0.698 0.313,0.156 10 false *c
*a Unlocked
*b Locked
*c 45°


Before installing the rear No. 1 seat outer belt assembly, check the ELR.

NOTICE:

Do not disassemble the retractor.


i.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

If the operation is not as specified, replace the rear No. 1 seat outer belt assembly.