Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT › from 2016.08
RM3250E _58 Vehicle Interior _038073 HEATING / AIR CONDITIONING _0187275 BLOWER UNIT A

HEATING / AIR CONDITIONING  BLOWER UNIT  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 87130K 1.INSTALL NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)

a.
E320403

Attach the arm of the No. 1 blower damper servo sub-assembly to the link of the blower assembly as shown in the illustration.


b.

Install the No. 1 blower damper servo sub-assembly with the 2 screws.


Hide 55908A 2.INSTALL AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System, Manual Cooler System)

a.
E320404

Attach the arm of the air inlet damper control cable sub-assembly to the link of the blower assembly as shown in the illustration.


b.

Attach the claw to install the air inlet damper control cable sub-assembly.


Hide 87103B 3.INSTALL BLOWER WITH FAN MOTOR SUB-ASSEMBLY

a.
E352562

for Automatic Air Conditioning System, w/ Rear Resistor Duct, for LHD:

i.

Install the blower with fan motor sub-assembly with the 3 screws.


ii.
E352561

Connect the connector.


iii.

Attach the clamp.



b.
E320400

for Automatic Air Conditioning System, w/ Rear Resistor Duct, for RHD:

Install the blower with fan motor sub-assembly with the 3 screws.


c.

for Automatic Air Conditioning System, w/o Rear Resistor Duct:

Install the blower with fan motor sub-assembly with the 3 screws.


d.

for Manual Air Conditioning System, Manual Cooler System:

Install the blower with fan motor sub-assembly with the 3 screws.


Hide 87139D 4.INSTALL AIR REFINER ELEMENT

a.
E320405C01
0,0 0,0 false
V113147

Install in this Direction


for Automatic Air Conditioning System:

Align the "UP" marks as shown in the illustration and install the air refiner element.

NOTICE:

Make sure that the "UP" mark is facing the correct direction before installing the filter.



b.
E320406C01
0,0 0,0 false
V113147

Install in this Direction


for Manual Air Conditioning System, Manual Cooler System:

Align the "UP" marks as shown in the illustration and install the air refiner element.

NOTICE:

Make sure that the "UP" mark is facing the correct direction before installing the filter.



Hide 88548B 5.INSTALL AIR FILTER CASE

a.
E320407C01
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


for Automatic Air Conditioning System:

Attach the claw and guide to install the air filter case.


b.
E320408C01
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


for Manual Air Conditioning System, Manual Cooler System:

Attach the claw and guide to install the air filter case.


Hide 87165C 6.INSTALL BLOWER MOTOR CONTROL (for Automatic Air Conditioning System)

a.
E323926

w/ Rear Resistor Duct, for RHD:

i.

Install the blower motor control with the 2 screws.



b.

w/o Rear Resistor Duct:

i.

Install the blower motor control with the 2 screws.



Hide 87138C 7.INSTALL BLOWER RESISTOR (for Manual Air Conditioning System, Manual Cooler System)

a.
E320394

Install the blower resistor with the 2 screws.