88410
1.INSPECT MAGNET CLUTCH ASSEMBLY
Inspect the magnet clutch assembly.
Apply battery voltage to the clutch and check the operation of the clutch.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 1 (MG+)
Battery negative (-) → Body ground |
Magnet clutch is engaged |
| *A | w/o Thermostat, for Type A | *B | w/o Thermostat, for Type B |
| *C | w/ Thermostat | - | - |
| *a | Component without harness connected
(Magnet Clutch Assembly) |
- | - |
If the result is not as specified, replace the magnet clutch assembly.