Home › General › SPECIFICATIONS › TIRE PRESSURE MONITORING › from 2016.08
RM3250E _V1 General _038082 SPECIFICATIONS _0294819 TIRE PRESSURE MONITORING F

SPECIFICATIONS  TIRE PRESSURE MONITORING  SERVICE DATA  


Tire Pressure Warning Reset Switch:
Check resistance Tester Connection Switch Condition Specified Condition
1 (E) - 4 (INT) Tire pressure warning reset switch pressed Below 1 Ω
Tire pressure warning reset switch not pressed 10 kΩ or higher
Check illumination Measurement Condition Switch Condition
Battery positive (+) →3 (ILL+)
Battery negative (-) → 2 (ILL-)
Illuminates