Home › Vehicle Exterior › BODY WELD POINT › FRAME SIDE RAIL FRONT
BM33J0E _01 Vehicle Exterior _041756 BODY WELD POINT _0194265 FRAME SIDE RAIL FRONT F

BODY WELD POINT  FRAME SIDE RAIL FRONT  ASSEMBLY REPLACEMENT  


K123735

With the frame auxiliary crossmember assembly and cab mounting No.1 bracket assembly removed.


K123943C01
0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A for 2WD - -


HINT:
·

Use the same procedure for the RH and LH.

·

The procedure listed below is for the RH.



REMOVAL


Symbol Meaning
K108826

Cut with Disc Sander etc.

K123944C01
1.948,5.854 2.26,6.01 0.313,0.156 10 false *A 1.948,3.26 2.26,3.417 0.313,0.156 10 false *A 2.323,1.198 2.635,1.354 0.313,0.156 10 false *C 1.938,0.802 2.25,0.958 0.313,0.156 10 false *A 2.323,2.885 2.635,3.042 0.313,0.156 10 false *B 2.313,5.469 2.625,5.625 0.313,0.156 10 false *C
*A FRONT *B UPPER
*C LH - -



INSTALLATION


Symbol Meaning
K108830

Fillet Weld

a.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)


b.

Make sure that proper welding can be performed by setting up the welding conditions as necessary before performing work.


c.

To prevent heat deformation, weld the right and left side of each part before continuing to the next part.


d.

Make sure that the welding bead at A is overlapped.

K123945C01
4.208,0.958 4.333,0.417 4.333,0.417 4.583,0.417 false 3.75,0.938 3.583,0.417 3.583,0.417 3.333,0.417 false 4.156,5.76 4.333,5.167 4.333,5.167 4.583,5.167 false 3.698,5.781 3.51,5.167 3.51,5.167 3.26,5.167 false 2.906,0.677 2.833,0.417 2.833,0.417 2.583,0.417 false 1.938,5.854 2.25,6.01 0.313,0.156 10 false *A 1.938,3.26 2.25,3.417 0.313,0.156 10 false *A 2.333,5.469 2.646,5.625 0.313,0.156 10 false *C 1.938,0.802 2.25,0.958 0.313,0.156 10 false *A 2.333,2.885 2.646,3.042 0.313,0.156 10 false *B 2.344,1.188 2.656,1.344 0.313,0.156 10 false *C 2.417,0.313 2.729,0.469 0.313,0.156 10 false *1 4.813,4.271 5.125,4.427 0.313,0.156 10 false *a 3.74,4.938 4.052,5.094 0.313,0.156 10 false *b 4.635,0.323 4.948,0.479 0.313,0.156 10 false A 3.208,0.323 3.521,0.479 0.313,0.156 10 false A 3.125,5.094 3.438,5.25 0.313,0.156 10 false A 4.635,5.083 4.948,5.24 0.313,0.156 10 false A
*A FRONT *B UPPER
*C LH - -
*1 SIDE RAIL EXTENSION ASSEMBLY - -
*a 146 mm (5.75 in.) *b 172 mm (6.77 in.)



e.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.