Home › Engine / Hybrid System › 2TR-FE ENGINE CONTROL › SFI SYSTEM
NM33J0E _51 Engine / Hybrid System _040405 2TR-FE ENGINE CONTROL _0187412 SFI SYSTEM CO CONTROL F

2TR-FE ENGINE CONTROL  SFI SYSTEM  CONTROL  ELECTRONIC THROTTLE CONTROL SYSTEM-intelligent (ETCS-i) CONTROL  


FUNCTION


a.

The Electronic Throttle Control System-intelligent (ETCS-i) is used, providing excellent throttle control in all the operating ranges. An accelerator pedal position sensor has been provided on the accelerator pedal.


b.

The ETCS-i uses the ECM to calculate the optimal throttle valve opening that is appropriate for the respective driving conditions and uses a throttle control motor to control the opening.


c.

The ETCS-i controls the Idle Speed Control (ISC) system.


d.

In case of an abnormal condition, this system switches to limp mode.

W126139E01
3.302,0.802 3.5,0.229 3.5,0.229 3.708,0.229 true 4.323,0.927 4.5,0.51 4.5,0.51 4.677,0.51 true 1.833,0.833 1.677,0.458 1.677,0.458 1.49,0.458 true 4.427,3.76 4.521,4.115 4.521,4.115 4.708,4.115 true 3.76,0.135 4.729,0.5 0.969,0.365 10 false Throttle Valve 4.729,0.417 6.229,0.76 1.5,0.344 10 false Throttle Position Sensor 4.938,0.781 6.438,1.125 1.5,0.344 10 false Throttle Control Motor 0.333,0.385 1.438,1.125 1.104,0.74 10 false Accelerator Pedal Position Sensor 0.833,2.167 2.26,2.781 1.427,0.615 10 false Intake Mass Air Flow Meter Sub-assembly 3.406,3 3.844,3.26 0.438,0.26 10 false ECM 5.052,2.125 6.458,2.479 1.406,0.354 10 false Ignition Coil Assembly 5.031,2.813 6.5,3.177 1.469,0.365 10 false Fuel Injector Assembly 5.156,3.531 6.563,3.885 1.406,0.354 10 false Skid Control ECU*2 4.75,4.042 5.667,4.406 0.917,0.365 10 false CAN (V Bus) 0.438,2.948 2.479,3.302 2.042,0.354 10 false Combination Switch Assembly*1 0.781,3.396 2.271,3.708 1.49,0.313 10 false POWER Mode Switch 0.865,3.823 2.354,4.135 1.49,0.313 10 false ECO Mode Switch 0.375,4.542 1.844,4.781 1.469,0.24 10 false *2: Models with VSC 0.365,4.271 3.313,4.615 2.948,0.344 10 false *1: Models with combination switch assembly

Controls of ETCS-i
Idle Speed Control (ISC) The ECM controls the throttle valve in order to constantly maintain an ideal idle speed.
Driving Mode Control NORMAL Mode When the NORMAL mode is selected, in order to generate engine output according to driving conditions and the accelerator pedal opening angle, the ECM controls the throttle valve opening angle.
POWER Mode*1 When the POWER mode is selected, throttle valve opening angle control is performed in accordance with the pedal opening angle.
ECO Mode*1 When the ECO mode is selected, in order to improve actual fuel economy, the ECM controls the throttle valve opening angle to gradually increase output according to the accelerator pedal opening angle.
Brake Control Coordination Control*2 The ECM ensures vehicle stability by controlling the throttle valve opening angle according to request signals received from the skid control ECU in order to maximize the effectiveness of the brake control system through cooperation with the skid control ECU.

*1: Models with combination switch assembly

*2: Models with VSC



e.

The ECM drives the throttle control motor by determining the target throttle valve opening in accordance with the respective operating conditions.


f.

The ECM controls the throttle to an optimal throttle valve opening that is appropriate for the driving conditions, such as the amount of accelerator pedal effort and the engine speed, in order to achieve excellent throttle control and comfort in all operating ranges.

Control Examples during Acceleration and Deceleration
W102921E06
5.781,0.115 6.75,0.5 0.969,0.385 10 false : With control 5.792,0.49 6.938,0.927 1.146,0.438 10 false : Without control 0.802,0.823 2.333,1.208 1.531,0.385 10 false Vehicle's Longitudinal G 0.521,1.979 2.375,2.323 1.854,0.344 10 false Throttle Valve Opening Angle 0.125,2.885 2.365,3.302 2.24,0.417 10 false Accelerator Pedal Depression Angle 5.333,3.438 5.781,3.74 0.448,0.302 10 false Time