Home › Engine / Hybrid System › 2TR-FE STARTING › STARTING SYSTEM › 2015.06–2015.11
NM33J0E _51 Engine / Hybrid System _040412 2TR-FE STARTING _0187420 STARTING SYSTEM GE GENERAL F

2TR-FE STARTING  STARTING SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A planetary reduction type starter is used.


b.

A starter control (cranking hold function) is used on the models with smart entry and start system. Once the engine switch is pushed, this control continues to operate the starter until the engine has started.



SPECIFICATION


Rating Output 1.6 kW
Rating Voltage 12 V
Length*1 190.8 mm (7.51 in.)
Weight 3350 g (7.4 lb)
Rotating Direction*2 Clockwise

HINT:

*1: Length from the mounted area to the rear end of the starter.

*2: Viewed from pinion side.