CONSTRUCTION
Combination Meter Assembly
When the certification ECU (smart key ECU assembly) detects an abnormality with the smart entry and start system, a message appears on the multi-information display. If the engine is stopped in this state, it might not be possible to restart it.
| *1 | Multi-information Display | - | - |
| *a | Power Source State | *b | Power Source On (ACC) |
| *c | Power Source On (IG) | *d | Key Warning Light |
| Displayed Item | Power Source Condition |
|---|---|
| - | Either of the following conditions is met:
·
The engine has started. ·
The power source is turned off. |
| ACCESSORY | On (ACC) |
| IGNITION ON | On (IG) |
| Key Warning Light | Engine start ready state (the shift lever is in P*1, the key certification result is OK and the brake pedal*1 or clutch pedal*2 is depressed) |
*1: Models with automatic transmission
*2: Models with manual transmission