FUNCTION OF MAIN COMPONENTS
The components have the following functions:
| Component | Function |
|---|---|
|
*1: Models with automatic transmission *2: Models with manual transmission |
|
| Rear Television Camera Assembly | Transmits a video signal of the area behind the vehicle to the radio and display receiver assembly. |
| Radio and Display Receiver Assembly | Displays the image transmitted by the rear television camera assembly on the screen. |
| Park/Neutral Position Switch Assembly*1 | Transmits the shift position signal to the radio and display receiver assembly. |
| Back-up Light Switch Assembly*2 | Transmits the on/off signal of the back-up light switch assembly to the radio and display receiver assembly. |
SYSTEM CONTROL
This system operates when both the following conditions have been met:
The ignition switch is ON.
The shift lever is in R.
FUNCTION
Area Displayed on Screen
Objects on the right of the vehicle appear on the right side of the display panel, and objects on the left of the vehicle appear on the left side of the display panel.
The rear television camera assembly uses a wide-angle lens. The perceived distance from images that appear on the screen differs from the actual distance.
| *a | The illustrations shown are examples only. The illustrations may differ from the actual vehicle screens. | - | - |
The area displayed on the screen may vary according to vehicle status or road conditions. The area covered by the rear television camera assembly is limited. The rear television camera assembly does not show objects close to either corner of the bumper or show the area under the bumper.
Warning Message
A warning message appears at the bottom of the screen under the following condition. The warning message appears in the same language that has been selected by the language selector of the radio and display receiver assembly.
| Warning Message | Condition |
|---|---|
| Check surroundings for safety. | This message always appears during system operation. |
FAIL-SAFE
The table below indicates fail-safe operation when a malfunction is detected:
| Malfunctioning Part | Detection Item | Function |
|---|---|---|
| Rear Television Camera Assembly | A rear television camera assembly malfunction signal is detected. | The system stops signal reception and displays a dark screen. |