Home › Engine / Hybrid System › 2TR-FBE COOLING › COOLING SYSTEM › from 2016.07
NM33J0E _51 Engine / Hybrid System _053824 2TR-FBE COOLING _0261514 COOLING SYSTEM GE GENERAL F

2TR-FBE COOLING  COOLING SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The cooling system uses a pressurized forced-circulation system with an open air type reservoir tank.


b.

A thermostat with a bypass valve is located in the water inlet housing to maintain suitable temperature distribution in the cooling system.


c.

A water pump swirl chamber and a thermostat housing have been placed in the timing chain cover to achieve a simpler construction and a compact engine.


d.

A 3-stage temperature-controlled fluid coupling fan controls the fan speed in 3 stages to improve cooling performance and reduce cooling fan noise.


e.

Toyota Genuine Super Long Life Coolant (SLLC) is used.


f.

A water-cooled type engine oil cooler is used.



SPECIFICATION


a.

Engine Coolant

Engine Coolant Type Toyota Genuine Super Long Life Coolant (SLLC) or similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology (coolant with long-life hybrid organic acid technology is a combination of low phosphates and organic acids). Do not use plain water alone.
Maintenance Intervals First Time 160000 km (100000 miles)
Subsequent Every 80000 km (50000 miles)
Color Pink

HINT:

SLLC is pre-mixed (50% coolant and 50% deionized water).



b.

Thermostat

Thermostat Opening Temperature 80°C to 84°C (176°F to 183°F)