Home › Engine / Hybrid System › 1GD-FTV EMISSION CONTROL › EMISSION CONTROL SYSTEM › from 2016.10
NM33J0E _51 Engine / Hybrid System _041096 1GD-FTV EMISSION CONTROL _0191088 EMISSION CONTROL SYSTEM DE DETAILS F

1GD-FTV EMISSION CONTROL  EMISSION CONTROL SYSTEM  DETAILS  OXIDATION CATALYST  


CONSTRUCTION


a.

An oxidation catalyst is used to purify HC and CO in the exhaust gas.


b.

The exhaust gas temperature sensors periodically check for oxidation catalyst function malfunctions.*

*: Models Compliant with Tier 1.5 Emission Regulation


i.

During the exhaust stroke, fuel is injected by the main injector (post injection) and the temperature of the catalyst rises. At this time, the ECM monitors the temperature of the exhaust gas using the exhaust gas temperature sensors in front of and behind the catalyst. If the temperature does not rise, an oxidation catalyst function malfunction will be detected.

Models without Catalyst Support Control
W134018C01
4.135,1.396 5.042,1.031 true 2.177,2.042 3.469,1.635 true 3.927,2.219 4.646,2.99 true 1.708,2.01 2.406,2.417 0.698,0.406 10 false *2 (*A) 4.688,3.01 5.156,3.323 0.469,0.313 10 false *3 5.073,0.927 5.771,1.333 0.698,0.406 10 false *1 (*A)
*A Models Compliant with Tier 1.5 Emission Regulation - -
*1 Exhaust Gas Temperature Sensor *2 No. 2 Exhaust Gas Temperature Sensor
*3 Oxidation Catalyst - -
V100135

Exhaust Gas - -


Models with Catalyst Support Control
W127942C01
4.938,2.115 4.271,1.729 true 2.521,1.833 1.771,1.5 true 1.594,1.365 1.906,1.521 0.313,0.156 10 false *1 4.969,2.052 5.281,2.208 0.313,0.156 10 false *2
*1 Exhaust Manifold Converter Sub-assembly *2 Oxidation Catalyst
V100135

Exhaust Gas - -