Home › Suspension › REAR SUSPENSION › REAR SHOCK ABSORBER(for 4WD and Pre-Runner) › 2015.06–2015.11
RM33J0E _53 Suspension _038475 REAR SUSPENSION _0187670 REAR SHOCK ABSORBER(for 4WD and Pre-Runner) A

REAR SUSPENSION  REAR SHOCK ABSORBER(for 4WD and Pre-Runner)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The RH side rear shock absorber assembly RH lower protector should face to the front side.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 48540 1.TEMPORARILY INSTALL REAR SHOCK ABSORBER ASSEMBLY LH

C322861

a.

Install the 2 rear No. 1 shock absorber cushion washers to the axle housing.


b.

Install 4 new rear shock absorber bushes to the rear shock absorber assembly LH.


c.

Install the rear shock absorber assembly LH and 4 rear shock absorber bushes to the axle housing and frame.


d.

Install the 2 rear No. 2 shock absorber cushion washers.


e.

Temporarily install the 2 bolts.


Hide 3.STABILIZE SUSPENSION

a.

Lower the vehicle.


b.

Press down on the vehicle several times to stabilize the suspension.


Hide 48540 4.TIGHTEN REAR SHOCK ABSORBER ASSEMBLY LH

a.

Tighten the 2 bolts.

Torque:
105 N*m (1071 kgf*cm, 77 ft.*lbf)