Home › Suspension › REAR SUSPENSION › REAR LEAF SPRING(for 2WD)
RM33J0E _53 Suspension _038475 REAR SUSPENSION _0187671 REAR LEAF SPRING(for 2WD) A

REAR SUSPENSION  REAR LEAF SPRING(for 2WD)  INSTALLATION  


PROCEDURE

Hide 48220 1.INSTALL REAR SPRING ASSEMBLY LH

a.

Install the rear spring assembly LH to the vehicle body.


Hide 48210A 2.INSTALL REAR UPPER SPRING SHACKLE BUSH

a.

Install 2 new rear upper spring shackle bushes to the vehicle frame.


Hide 3.INSTALL NO. 2 SPRING SHACKLE SUB-ASSEMBLY

a.

Install the No. 2 rear spring shackle sub-assembly to the rear spring assembly LH and vehicle body.


Hide 4.TEMPORARILY INSTALL SPRING SHACKLE INNER PLATE

a.
C334406C01
2.365,2.969 2.677,3.167 0.313,0.198 10 false *a
*a Bottom of Vehicle


Temporarily install the spring shackle inner plate to the No. 2 rear spring shackle sub-assembly with the 2 washers and 2 nuts shown in the illustration.

HINT:

After stabilizing the suspension, tighten the nuts.



Hide 5.TEMPORARILY INSTALL PIN BOLT (except Single Cab)

a.

Temporarily install the pin bolt with the washer and nut.

HINT:

After stabilizing the suspension, tighten the nut.



Hide 48409A 6.TEMPORARILY INSTALL REAR SPRING BRACKET PIN SUB-ASSEMBLY (for Single Cab)

a.

Temporarily install the rear spring bracket pin sub-assembly with the washer and nut.


b.

Temporarily install the set bolt.

HINT:

After stabilizing the suspension, tighten the nut.



Hide 48046A 7.TEMPORARILY INSTALL REAR SPRING U BOLT

a.

Temporarily install the 2 rear spring U bolts and U bolt seat with the 4 washers and 4 nuts.

HINT:

When tightening the U bolts, tighten the nuts in diagonal pairs.



Hide 48341 8.INSTALL REAR SPRING BUMPER

a.

Install the rear spring bumper with the 2 bolts.


Hide 48540 9.INSTALL REAR SHOCK ABSORBER ASSEMBLY LH

Hide 46430 10.CONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY

a.

Connect the No. 3 parking brake cable assembly with the bolt.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)


Hide 12.TIGHTEN SPRING SHACKLE INNER PLATE

a.

Tighten the 2 nuts.

Torque:
60 N*m (612 kgf*cm, 44 ft.*lbf)


Hide 13.TIGHTEN PIN BOLT (except Single Cab)

a.

Tighten the pin nut.

Torque:
120 N*m (1224 kgf*cm, 89 ft.*lbf)


Hide 48409A 14.TIGHTEN REAR SPRING BRACKET PIN SUB-ASSEMBLY (for Single Cab)

a.

Tighten the pin nut.

Torque:
125 N*m (1275 kgf*cm, 92 ft.*lbf)


b.

Tighten the set bolt.

Torque:
25 N*m (255 kgf*cm, 18 ft.*lbf)


Hide 48047 15.TIGHTEN SPRING U BOLT SEAT SUB-ASSEMBLY LH

a.

Tighten the 4 nuts.

Torque:
68 N*m (693 kgf*cm, 50 ft.*lbf)


Hide 16.INSTALL REAR WHEEL