Home › Suspension › REAR SUSPENSION › REAR LEAF SPRING(for 2WD)
RM33J0E _53 Suspension _038475 REAR SUSPENSION _0187671 REAR LEAF SPRING(for 2WD) A

REAR SUSPENSION  REAR LEAF SPRING(for 2WD)  DISASSEMBLY  


PROCEDURE

Hide 48210B 1.REMOVE REAR SPRING PIN BUSH (for Single Cab)

a.

Using a screwdriver, remove the 2 rear spring pin bushes from the rear spring assembly LH.


Hide 48210G 2.REMOVE REAR LOWER SPRING SHACKLE BUSH

a.

Using a screwdriver, remove the 2 rear lower spring shackle bushes from the rear spring assembly LH.


Hide 48220 3.DISASSEMBLE REAR SPRING ASSEMBLY LH

C236367

a.

Secure the rear spring assembly LH in a vise between aluminum plates.


b.

Using a brass bar and hammer, pry open the 4 spring clips of the rear No. 3 spring leaf.

NOTICE:

Do not damage the leaf spring.



c.
C236368

Secure the spring with a vise as shown in the illustration.


d.

Remove the nut and center bolt.


e.

Remove the 2 rear No. 3 spring spacers.


f.

Remove the rear No. 1 spring spacer.


Hide 48252 4.REMOVE REAR SPRING SILENCER

a.

Remove the 4 rear spring silencers from the leaf spring.


Hide 48210C 5.REMOVE REAR SPRING LEAF BUSH (except Single Cab)

a.
C322868N01
0.802,1.865 0.938,1.865 0.938,1.865 1.135,1.531 true 0.896,0.885 1.146,0.885 false 0.594,0.802 1.052,1 0.458,0.198 10 false SST 0.51,1.792 0.969,1.99 0.458,0.198 10 false SST

Using SST and a press, press out the rear spring leaf bush.

SST
09631-12090  
09632-36010