Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR AXLE SHAFT
RM33J0E _52 Drivetrain _038472 AXLE AND DIFFERENTIAL _0187680 REAR AXLE SHAFT G

AXLE AND DIFFERENTIAL  REAR AXLE SHAFT  INSPECTION  


PROCEDURE

Hide 42312 1.INSPECT REAR AXLE SHAFT LH

a.
F050876

Using a dial indicator, measure the shaft runout and flange runout of the rear axle shaft.

Maximum runout:
Item Specified Condition
Shaft runout 1.5 mm (0.0591 in.)
Flange runout 0.10 mm (0.00394 in.)


If the rear axle shaft is damaged or worn, or if the runout is more than the maximum, replace the rear axle shaft.