Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER
RM33J0E _59 Vehicle Exterior _038514 EXTERIOR PANELS / TRIM _0188889 FRONT BUMPER A

EXTERIOR PANELS / TRIM  FRONT BUMPER  REMOVAL  


PROCEDURE

Hide 53117C 1.REMOVE NO. 1 RADIATOR GRILLE RETAINER

a.
B399236

Remove the 8 clips and No. 1 radiator grille retainer.


Hide 52119A 2.REMOVE FRONT BUMPER COVER

a.
B399237C02
0.063,0.031 0.375,0.229 0.313,0.198 10 false *A 0.063,2.583 0.375,2.781 0.313,0.198 10 false *B 0.094,0.625 0.344,0.854 0.25,0.229 10 false *a 0.115,3.198 0.365,3.427 0.25,0.229 10 false *a
*A for Standard Body
*B for Wide Body
*a 90°
V113147

Rotation Direction


Using a screwdriver, turn the pin hold clip 90° and remove the pin hold clip.

HINT:

Use the same procedure for the pin hold clips on the other side.



b.

Remove the clip.

HINT:

Use the same procedure for the clip on the other side.



c.
B399238C01
0.375,1.958 0.323,1.719 0.323,1.719 0.219,1.719 false 0.729,1.906 0.99,1.938 0.99,1.938 1.208,1.938 true 0.604,2.073 0.969,1.938 true 1.094,1.667 1.604,1.833 1.604,1.833 2,1.833 true 1.292,1.573 1.594,1.823 true 1.844,1.375 1.604,1.823 true 2.365,1.208 2.74,1.781 2.74,1.781 3.063,1.781 true 3.125,1.229 2.75,1.771 true 2.667,1.188 2.74,1.771 true 0.042,1.625 0.25,1.833 0.208,0.208 10 false *b 1.25,1.854 1.458,2.063 0.208,0.208 10 true *b 2.063,1.677 2.271,1.885 0.208,0.208 10 true *a 3.104,1.708 3.313,1.917 0.208,0.208 10 true *b
*a Bolt
*b Screw


Remove the 6 screws and 3 bolts.


d.

Put protective tape around the front bumper cover.

B399239C02
0.052,0.031 0.365,0.229 0.313,0.198 10 false *A 3.698,0.042 4.01,0.24 0.313,0.198 10 false *B
*A for Standard Body *B for Wide Body
V100155

Protective Tape - -



e.
B399240C01
1.313,0.24 1.563,0.24 true 2.24,0.229 2.49,0.229 true 0.354,0.427 0.604,0.427 true 2.74,0.667 2.938,0.667 2.938,0.667 3.083,0.427 true 1.583,0.156 1.844,0.406 0.26,0.25 10 true *a 0.615,0.354 0.833,0.594 0.219,0.24 10 true *b 2.5,0.146 2.76,0.396 0.26,0.25 10 true *a 2.563,0.594 2.781,0.833 0.219,0.24 10 true *b
*a Bolt
*b Screw


Remove the 2 screws and 2 bolts.


f.
B399241

Remove the 3 screws.


g.
B399242C01
2.813,4.115 2.646,3.969 false
V113146

Place Hands Here
V113147

Remove in this Direction


for Standard Body:

i.

Detach the claw as shown in the illustration.

HINT:

Use the same procedure for the claw on the other side.




h.
B399281C01
2.906,4.104 2.656,3.938 false
V113146

Place Hands Here
V113147

Remove in this Direction


for Wide Body:

i.

Detach the claw as shown in the illustration.

HINT:

Use the same procedure for the claw on the other side.




i.

w/ Fog Light:

i.

Disconnect the connector.



j.
B399284C01
0.177,2.573 0.49,2.771 0.313,0.198 10 false *B 0.135,0.073 0.448,0.271 0.313,0.198 10 false *A
*A for Standard Body
*B for Wide Body
V113147

Remove in this Direction


Remove the front bumper cover as shown in the illustration.


Hide 53294C 3.REMOVE RADIATOR SIDE DEFLECTOR LH

a.
B399243C01
1.021,3.938 1.208,3.813 false 1.042,3.938 1.25,3.792 false 1.021,3.938 1.25,3.76 false
V113147

Remove in this Direction


w/ Intercooler:

i.

Detach the claw and remove the radiator side deflector LH as shown in the illustration.



b.
B399282C01
1,3.917 1.25,3.729 false 1.01,3.854 1.24,3.74 false
V113147

Remove in this Direction


w/o Intercooler:

i.

Detach the claw and remove the radiator side deflector LH as shown in the illustration.



Hide 53293C 4.REMOVE RADIATOR SIDE DEFLECTOR RH

HINT:

Use the same procedure described for the LH side.


Hide 53163A 5.REMOVE FRONT BUMPER STONE DEFLECTOR LH

a.
B399244C01
0.719,3.396 1,3.49 false 0.729,3.396 1.031,3.469 false
V113147

Remove in this Direction


Detach the claw and guide and remove the front bumper stone deflector LH as shown in the illustration.


Hide 53162A 6.REMOVE FRONT BUMPER STONE DEFLECTOR RH

HINT:

Use the same procedure described for the LH side.


Hide 52021 7.REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

a.
B399245C01
1.135,1.292 1.323,1.229 false 1.104,1.302 1.333,1.208 false
V113147

Remove in this Direction


Remove the 4 bolts and front bumper reinforcement sub-assembly as shown in the illustration.


Hide 52116A 8.REMOVE FRONT BUMPER SIDE SUPPORT LH (for Standard)

a.
B399246C02
2.229,1.01 2.521,1.219 0.292,0.208 10 true *a
*a 90°
V113147

Rotation Direction
V113148

Remove in this Direction


Remove the bolt and clip.


b.

Using a screwdriver, turn the clip 90° and remove the clip.


c.

Detach the claw and remove the front bumper side support LH as shown in the illustration.


Hide 52115A 9.REMOVE FRONT BUMPER SIDE SUPPORT RH (for Standard)

HINT:

Use the same procedure described for the LH side.


Hide 52116A 10.REMOVE FRONT BUMPER SIDE SUPPORT LH (for Wide Body)

a.
B399247C02
2.219,0.885 2.438,1.094 0.219,0.208 10 true *a
*a 90°
V113147

Rotation Direction
V113148

Remove in this Direction


Remove the bolt and clip.


b.

Using a screwdriver, turn the clip 90° and remove the 2 clips.


c.

Detach the claw and remove the front bumper side support LH as shown in the illustration.


Hide 52115A 11.REMOVE FRONT BUMPER SIDE SUPPORT RH (for Wide Body)

HINT:

Use the same procedure described for the LH side.