52421A
1.INSTALL FRONT BUMPER PAD
When installing the front bumper pad, heat the front bumper cover using a heat light.
Use the same procedure for all front bumper pads.
| Item | Temperature |
|---|---|
| Front Bumper Cover | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Clean the rear spoiler surface.
Using a heat light, heat the front bumper cover surface.
Remove the double-sided tape from the front bumper cover.
Wipe off any tape adhesive residue with cleaner.
Install a new front bumper pad.
Using a heat light, heat the front bumper cover.
Remove the peeling paper from the face of the front bumper pad.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the front bumper pad as shown in the illustration.
Press the front bumper pad firmly to install it.
52126A
2.INSTALL FOG LIGHT MOUNTING BRACKET LH (w/ Fog Light)
|
Install in this Direction |
Attach the claw to install the fog light mounting bracket LH as shown in the illustration.
52125A
3.INSTALL FOG LIGHT MOUNTING BRACKET RH (w/ Fog Light)
Use the same procedure described for the LH side.
81482C
4.INSTALL FOG LIGHT COVER LH (w/ Fog Light)
|
Install in this Direction |
Attach the claw to install the fog light cover LH as shown in the illustration.
81481E
5.INSTALL FOG LIGHT COVER RH (w/ Fog Light)
Use the same procedure described for the LH side.
52128C
6.INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light)
|
Install in this Direction |
Attach the claw to install the front bumper hole cover LH as shown in the illustration.
52127D
7.INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light)
Use the same procedure described for the LH side.
81220
8.INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)
81210A
9.INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)
Use the same procedure described for the LH side.
53112E
10.INSTALL LOWER NO. 1 RADIATOR GRILLE
|
Install in this Direction |
Attach the claw to install the 2 screws and lower No. 1 radiator grille as shown in the illustration.
53111
11.INSTALL RADIATOR GRILLE