Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY(for Halogen Headlight)
RM33J0E _59 Vehicle Exterior _038498 LIGHTING (EXT) _0189310 HEADLIGHT ASSEMBLY A

LIGHTING (EXT)  HEADLIGHT ASSEMBLY  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81144C 1.REMOVE HEADLIGHT SOCKET COVER

E323689

a.

Remove the headlight socket cover from the headlight unit.


Hide 81110B 2.REMOVE NO. 1 HEADLIGHT BULB

a.
E323690C01
0,0 0,0 false
V113147

Release in this Direction


Push and pull up the set spring to release it.


b.

Remove the No. 1 headlight bulb from the headlight unit.

NOTICE:

Do not touch the glass part of the No. 1 headlight bulb.



Hide 81615D 3.REMOVE CLEARANCE LIGHT SOCKET

E316862C01
1.083,0.51 1.375,0.906 true 0.656,3.917 1.302,3.917 true 0.906,0.385 1.104,0.563 0.198,0.177 10 true *a 0.469,3.802 0.667,4 0.198,0.198 10 true *b
*a Matchmark
*b Unlock Position Mark
V113147

Counterclockwise


a.

Turn the clearance light socket counterclockwise until the matchmark is aligned with the unlock position mark to remove the clearance light socket from the headlight unit.


Hide 81610F 4.REMOVE CLEARANCE LIGHT BULB

a.
E316864

Remove the clearance light bulb from the clearance light socket.


Hide 81515B 5.REMOVE FRONT TURN SIGNAL LIGHT SOCKET

E316865C01
1.146,1.573 1.698,1.323 true 2.073,4.042 2.625,4.042 true 0.958,1.469 1.167,1.667 0.208,0.198 10 true *a 2.677,3.927 2.896,4.125 0.219,0.198 10 true *b
*a Matchmark
*b Unlock Position Mark
V113147

Counterclockwise


a.

Turn the front turn signal light socket counterclockwise until the matchmark is aligned with the unlock position mark to remove the front turn signal light socket from the headlight unit.


Hide 81510C 6.REMOVE FRONT TURN SIGNAL LIGHT BULB

a.
E316867C01
0,0 0,0 false
V113147

Push
V113148

Counterclockwise
V113149

Remove in this Direction


Push the front turn signal light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the front turn signal light socket.