Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81510C
1.INSTALL FRONT TURN SIGNAL LIGHT BULB
| *a | Protrusion |
|
Cutout |
Align the 2 protrusions on the front turn signal light bulb with the 2 cutouts of the front turn signal light socket and insert the bulb.
|
Push in this Direction |
|
Clockwise |
While pushing the front turn signal light bulb, turn the bulb clockwise to install the bulb.
81515B
2.INSTALL FRONT TURN SIGNAL LIGHT SOCKET
| *a | Matchmark |
| *b | Unlock Position Mark |
| *c | Lock Position Mark |
|
Clockwise |
Align the matchmark of the front turn signal light socket with the unlock position mark of the headlight unit, and then rotate the front turn signal light socket clockwise until the lock position mark to install the front turn signal light socket.
81610F
3.INSTALL CLEARANCE LIGHT BULB
Install the clearance light bulb to the clearance light socket.
81615D
4.INSTALL CLEARANCE LIGHT SOCKET
| *a | Matchmark |
| *b | Unlock Position Mark |
| *c | Lock Position Mark |
|
Clockwise |
Align the matchmark of the clearance light socket with the unlock position mark of the headlight unit, and then rotate the clearance light socket clockwise until the lock position mark to install the clearance light socket.
81110B
5.INSTALL NO. 1 HEADLIGHT BULB
Align the shaded area of the No. 1 headlight bulb shown in the illustration with the shaded area of the headlight unit and insert the No. 1 headlight bulb into the headlight unit.
Do not touch the glass part of the No. 1 headlight bulb.
|
Lock in this Direction |
Lock the set spring by moving it in the direction indicated by the arrow in the illustration.
81144C
6.INSTALL HEADLIGHT SOCKET COVER
Install the headlight socket cover to the headlight unit.