Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81144C
1.REMOVE HEADLIGHT SOCKET COVER
Disconnect the connector.
Remove the headlight socket cover.
81110B
2.REMOVE NO. 1 HEADLIGHT BULB
|
Release in this Direction |
Push and pull up the set spring to release it.
Remove the No. 1 headlight bulb.
Do not touch the glass part of the No. 1 headlight bulb.
81110B
3.INSTALL NO. 1 HEADLIGHT BULB
Align the shaded area of the No. 1 headlight bulb shown in the illustration with the shaded area of the headlight unit and insert the No. 1 headlight bulb into the headlight unit.
Do not touch the glass part of the No. 1 headlight bulb.
|
Lock in this Direction |
Lock the set spring by moving it in the direction indicated by the arrow in the illustration.
81144C
4.INSTALL HEADLIGHT SOCKET COVER
Install the headlight socket cover.